Best Way to Find a Stud in a Wall for amateurs
If you are looking for the best way to find a stud, then you are going to want to read this article. Specifically, we’ll discuss ways to find a stud in walls, ways to find a stud in ceilings, and ways to find a stud in floors. By the time you’re done reading this article, you’ll know more ways to find a stud than you do today. Let’s get started!
The best way to find a stud in a wall may be – using a stud locator.
Most hardware stores sell stud finders.
This is probably the easiest, most efficient way to locate studs in walls. Simply slide the stud locator over the wall and lights up or blink depending on the power of the locator.
If you do not have a stud finding device, there are many ways that can still be very effective in locating studs in walls. These options include drum or cylinder locators, line or cable locators, and others.
Ways to find a stud in ceilings – using a window searcher. Most homeowners are unaware that they should search for studs in ceilings too. When you use a window searcher, all you have to do is a lookup up the ceiling where you want to install some type of fixture.
Best way to find a stud in a wall or floor – using a stair locator.
This method works best in attics. With this option, you simply step up onto the stair, and the stair locator will guide you to all of the attics in your home. This is an extremely effective way to help you find any type of fixture you need to hang or install in a wall.
Best way to find a stud in basements – using a metal detector. There are some homeowners who believe that they should not use metal detectors when searching for a wall or ceiling stud. However, if you take some time to learn how to properly use a metal detector, it can really come in handy.
You can either purchase a detector that is corded or cordless, depending upon your preference. The cordless versions typically have a wider range of capabilities, but they are also more expensive. Using a corded detector allows you to run more searches, which means better chances of successfully locating a wall or ceiling stud.
Best way to find a stud in a wall – using a hammer.
While most people consider this a risky proposition, it is actually one of the best ways to find a stud in walls. Since you can’t usually place a piece of wood beside a wall in most homes, this is usually the only way that you can reach one wall without going outside of the house.
How to measure a wall before starting. Knowing how much space you will require to install a fixture can be a difficult task. Most hardware stores offer stud finders that allow you to easily measure each individual wall. Once you know how much room you will need, you can move on to the next step.
What do you do with the space you have?
You need to figure out how big the area is that you have to work with, and then use a stud finder to determine where that wall should be placed.
What fixtures do you need to hang on your wall?
Before you can find a stud, you’ll need to know what type of lighting you will want to install. You need to make sure that all of your lighting fixtures will fit, and that the spacing between fixtures is enough to hold the cords that come with them.
Once you know how many lights you will need, you can start looking for that perfect wall to install your fixture on. Now that you know how to find a stud in a wall, you can begin setting up your lamps.
measure 16 inches
tap the wall
hit a stud
16 or 24 inches
locate the nearest
dimples in the wall
damage your wall